
Our offer:
- Touch switch - constantly illuminated in white color, placed near the bottom edge of the mirror, in the middle of its width.
- Sensor switch (for hand movement) - turns the illumination on upon detecting movement within 5cm from the sensor.
- Motion sensor - turns the illumination of the mirror on upon detecting movement inside the room (for example when entering the bathroom).

- Weather station S1 - indicates temperature both inside and outdoors, equipped with auto synchronization system and external sensor. Backlight color to choose - 8 possible colors. Dimensions of the station: 18,5 cm x 4,5 cm.
- Weather station S2 - indicates temperature both inside and outdoors, equipped with auto synchronization system and external sensor. Highlighted in orange. Dimensions of the station: 8,5 cm x 9 cm.
- Weather station S3 - indicates temperature both inside and outdoors, equipped with a quartz clock and external sensor. Dimensions of the station: 9,5 cm x 8,5 cm.
- LED Clock with the touch button - The icon of the clock functions as a touch button which allows changing of the displayed time and its format (12 / 24 h). The dimensions of a display on the mirror surface: 7 × 1.5 cm.

Make-up magnifying mirror
- Total diameter: 16 cm
- Width of the white border around the mirror: 2 cm
- Usable diameter: 14 cm
- The magnification of the mirror is 3x.
- he make-up mirror is placed near the right-hand edge of the mirror, in the middle of its height.

LED make-up magnifying mirror
- Total diameter: 17.5 cm
- Width of the illuminated border around the mirror: 1 cm
- Usable diameter: 12.5 cm
- The magnification of the mirror is 3x.
- The make-up mirror is placed near the right-hand edge of the mirror, in the middle of its height.
- Mirror lighting starts up with mirror backlight.

Demister
- Prevents the mirror from fogging up.
- Eliminates streaks by gradually heating the surface of the mirror.

Bluetooth speaker:
- The range of the Bluetooth module is approx. 10 m.
- The speaker is permanently supplied.
- Invisible to the user, installed behind the surface of the mirror.

Touch Panel - Created to control the entire mirror. It has a built-in speaker, touch switch and a clock with the date.
- On/off switch - used to turn the mirror’s illumination on/off. After pressing it and holding, it turns off the entire panel.
- DATE AND TIME - when pressed, it shows the year. Holding it down starts the date and time change mode — then every subsequent pressing allows to edit: hour, minutes, month, day, and year. Use [+] and [-] to set.
- BLUETOOTH - controls the speakers. After turning on, the date disappears and lines appear indicating the readiness for connection and volume. Upon restarting the speakers, the panel will automatically connect to the device.
- VOLUME - after turning on the speaker, it is used to change the volume. This mode is indicated by the flashing border around the degree of volume. Use [+] and [-] to set. The volume will be memorized after a few seconds.
- PLUS and MINUS - after turning on the speaker, they can be used to switch songs. After entering the volume or date and time change mode, they are used to increase or decrease the value.

Dual Color (interchangeable LED color):
- It is possible to change the color in a few steps – between cold (7000 K) and warm (3000 K) white.
- The controller found in set gives you control of the light intensity which allows you to freely dim and brighten it.
- The remote control allows you to store 4 different lighting configurations.